INTERNATIONAL BROTHERHOOD
OF ELECTRICAL WORKERS
LOCAL UNION 570
Tucson, Arizona
IBEW 570
Tool List
SECTION 3.09 Journeyman Wiremen and Apprentice Wireman 3rd period and above, will be required to provide themselves with at least the following:
Center Punch
* Hacksaw Frame
* Level-(small)
* Knife
* Pencil
* Power Return Tape – 25 ft.
* 2 Screw Drivers – (not over 8″)
Plumb-bob
Tri-square
* Claw Hammer
* Voltage Tester – The voltage tester/meter shall have a minimum rating of Category 3, per
NFPA-70E standards, with a range of 600 volts or higher
* 2 Pair – Channel-locks
* Side Cutter – 9″
Long Nose
Diagonals – 7″
10″ Crescent
Compass Saw – 10″
* Wire Stripper – #10-#22AWG
Crimping Tool – #10-#22AWG
Hex-Keys – 3/16″ thru 1/2″
Triple Tap – 6/32-8/32-10/32
Nut Drivers – 1/4″-5/16″-11/32″- 3/8″-7/16″-1/2″
* Phillips Screw Driver – #2
*Tool Pouch
Flashlight
1st and 2nd Period Apprentices will be required to provide themselves with the minimum of the tools indicated by asterisk (*), within thirty (30) days of their original referral.